|
Northern Toboggan & Sled Product Line
Ice Fisherman’s Hand Sled
New for the fall of 2006, we are excited to add the “Ice Fisherman’s Hand Sled” to our product line. This little sled came about much like our Downhill Toboggans did -- from the requests of outdoors people who have a sledding need. This sled is made for those folks who don’t use an ATV or Snowmobile to get out to their favorite spot on the ice. There has been considerable input from “walk on” ice fishermen for design and specs of this particular sled. It is small and light for easy loading in the vehicle. It is also strong and stable to handle all the gear and equipment for a day on the ice.
The general consensus is that whatever collapsible fish house is preferred, is first laid flat on the sled, then on top goes a crate or box of choice containing tackle, equipment, lunch, etc., and along side or on top of the crate goes the power auger. it is up to the individual fisherman to organize his “outfit” to simplify loading the sled. Once the sled is loaded the load is lashed or bungee strapped to the sled.
Fully loaded, this sled moves like nothing and makes the hike out and back to shore a pleasure.
 Overall width is 24”, with a 19-1/2” wide by 48” long plywood deck.- Overall length is 60”
- Height is 7-3/4”
- Weighs approximately 30 lbs.
- Sled runners are 2-1/2” wide
- Milled steel bridges and brackets
- Solid oak runners and frame
- HMW sliders installed on runners
- Linseed oil finish on wood, black enamel on steel
- Traditional, time-tested design
- Flexible to allow easy pulling and smooth ride
- Excellent handling, even with heavy loads
- Equipped with eyebolts fore and aft below the sled deck for ease in lashing the load
- Readily accepts cargo boxes
- Red oak and milled steel construction add beauty and remarkable durability
Hand Toboggan:
(Not for dog teams or snow machines)
 Weighs approximately 25 lbs. - Made from 2 boards, 12 feet long, 5/16 inch thick
- Widest point is approximately 14 inches at the first crosspiece, tapering to 11-1/2 inches at the end of the curl and 12 inches at the stern
- Overall length approximately 10 feet
- 8 feet of length flat on the ground
- Linseed oil finish
- Flexible and Lightweight - allows for smooth pulling and remarkable stability
- Long, narrow shape distributes weight of cargo and minimizes resistance and friction
- Red Oak construction provides beauty and durability
- Oak sled bottom polishes with use and becomes very slick for easy pulling
- Extra length and tapering allow for ease in turning
- Traditional toboggan design
Hand Toboggan: $270
ORDER
Downhill Toboggan
 When we started building sleighs for towing, we had inquiries for coasting toboggans, and when we launched our website, we had even more. Due to the many requests we experimented with prototypes in 2001. In 2002, we had our very good sleighs for sale. This season we added downhill toboggans to our product line. Customer satisfaction has been very high. This coasting toboggan is of very high quality by design, construction and materials. It has to be to have our brand.
3-Board Toboggan:
(For dog teams or snow machines)
Replacement Boards:
4-Board and 5-Board Toboggans:
(For dog teams or snow machines)
 Same basic design as the traditional 3-board - Lengths available (total board length - curl and flat)
(4 board weights shown)
- 12 foot - 85 lbs.
- 14 foot - 105 lbs.
- 16 foot - 125 lbs.
- Width: approximately 24 inches (4-board) or 30 inches (5-board)
- Wider toboggans are growing in popularity
- Useful with bigger snowmobiles and better trail conditions
- Increased cargo capacity that still allows for stability and maneuverability
- Order by selecting 3-board toboggan length above, and add replacement boards to desired width (example: 12’ 4-board toboggan is $380 + $95 = $475).
Freight Sleds:
(Snowmobile)
 Trapping Sled width 18 inches overall, with 13 inch wide by 70 inch long deck, 2-1/2 inch wide by 7 foot long oak runners - Traditional Sled - width 25 inches, with a 19-1/2 inch wide plywood deck
- Sport Sled - width 30 inches, with a 24-1/2 inch wide plywood deck
- Traditional and Sport widths available in these lengths:
- 8 foot runner with 75 inch long deck (approximately 65 lbs.)
- 10 foot runner, with 96 inch long deck (approximately 80 lbs.)
- Custom lengths also available
- Standard runners 4 inches wide
- Milled steel bridges and brackets
- Linseed oil finish on wood, black enamel on steel
- Steel hitch and HMW poly sliders included
- Traditional, time-tested design
- Flexible to allow easy pulling and smooth ride
- Excellent handling, even with heavy loads
- Red Oak and milled steel construction add beauty and remarkable durability
- Readily accepts cargo boxes
8' x 25" freight sled incl. hitch & sliders: $375
8' x 30" freight sled incl. hitch & sliders: $400
10' x 25" freight sled incl. hitch & sliders: $430
10' x 30" freight sled incl. hitch & sliders: $455
7' x 18" trappers sled incl. hitch & sliders: $330
ORDER
Cargo Boxes:
(For Freight Sleds)
 5/8 inch plywood construction - Corners and base reinforced with oak, glued and screwed
- Oak gunwales
- 4 eye bolts on each side for lashing cargo
- Linseed oil finish
- Readily attach to sled deck with 4 bolts
- Perfect for outdoors men
- Hauls a variety of cargo
- Ideal for the ice fisherman - holds auger, tackle, heater and other gear, with portable ice house lashed on top of gunwales
- Sturdy oak-reinforced construction for long life and durability
6' cargo box with handles, oak gunwales, & eye bolts: $175
8' cargo box with handles, oak gunwales, & eye bolts: $195
Replace handles with laminated driving bow: $65
ORDER
Backboards:
Toboggan Brake:
(For Mushers)
Hitches:
Slush Boards:
 Slush from the snowmobile track can accumulate on the front of a towing sled or between sled and machine, eventually pulling down on the track and causing spin-out. The Slush Board is a piece of molded UHMW poly that readily attaches to the front of the steel hitch. The board extends down below the sled deck and curves between the runners for approximately 12 inches. It won't interfere with the mobility of the hitch or the function of the sled, and it is held snub against the sled bottom with a rubber bungee strap. This directs any slush being thrown up by the track under the sled, not allowing any buildup. This setup will give both sled and snow machine the best chance to get past a potentially dangerous slush hazard.
Sliders:
Sliders are UHMW poly strips installed on toboggan edges to protect from rock and tree bashing, and to extend the life of the sled.
Toboggan Wrappers and Tanks:
(Wrappers are sewn canvas packs for dog toboggans.
Tanks are packs for hand toboggans.)
- 15 oz. natural cotton duck
- Quality sewn
- Grommets for lashing
- Sizes to fit all toboggans
- Tough and durable
- Adds cargo capacity to your sleigh
6'2" Dog Toboggan Wrapper: $135
8' Dog Toboggan Wrapper: $150
6' Hand Toboggan Tank: $75
8' Hand Toboggan Tank: $90
12' x 6' Tarp: $90
ORDER
 Toboggan Pads
- 11 oz., 100% polyester, 4-ply construction polymeric coated fabric that breaths and will not shrink, harden, crack or rot. High tensil strength, high abrasion resistance, and stay-true color.
- 2” high-resistant, medium-firm foam padding
- Polyester stitching
- Acrylic binding
- Brass grommets
- Custom sewn to fit our toboggans.
Custom Pad for 12’ Dog Toboggan (18” x 8’): $130
Custom Pad for 8’ Downhill Toboggan (16” x 6’): $110
ORDER
|
Made from 3 oak boards, 6 inches wide, 7/8 inch thick 
Backboards are typically used to hold lines from curl to backboard to the stern of the toboggan to allow for rope weaving between tie-around rope and backboard line 
Stainless steel and aircraft aluminum 
Welded steel 
