Slush from the snowmobile track can accumulate on the front of a towing sled or between sled and machine, eventually pulling down on the track and causing spin-out. The Slush Board is a piece of molded UHMW poly that readily attaches to the front of the steel hitch. The board extends down below the sled deck and curves between the runners for approximately 12 inches. It won't interfere with the mobility of the hitch or the function of the sled, and it is held snub against the sled bottom with a rubber bungee strap. This directs any slush being thrown up by the track under the sled, not allowing any buildup. This setup will give both sled and snow machine the best chance to get past a potentially dangerous slush hazard.
Snow sleds, toboggans, freight sleds, Snow sled, dog sled, Canadian toboggans, Canadian Sleds, dog sleds construction Snow sleds, toboggans, freight sleds, Snow sled, dog sled, Canadian toboggans, Canadian Sleds, dog sleds construction